December 8, 2008
Looking For A Fujitsu Keyboard ? It's Easy To Replace Them !!
Info about laptop spares shop
Its easy to change your laptop keyboard. So your laptop is now useless because the 'A' key suddenly just stopped, or your cat pulled half the keys off !? Maybe you spilt your tea and your keyboard is swollen with sticky liquid !
Once one key stops working, they dont usually recover. You can try removing the key cap with a screw driver gently to see if there is any obstruction, but be very careful as the key spring supporting this cap is very fragile and hard to get back in place if the spring comes in pieces. All is not loats though - you will be surprised how easy it is to replace your keyboard, and in doing so you can avoid having to pay a high price locally for what should be a relatively easy repair.
You can get a price online at www.laptopsparesshop.co.uk or ask your local stockist. Some brands, notable Acer, Toshiba and IBM price their keyboards very reasonably. Brands lioke Samsung, Fujitsu, Sony and Packard Bell tend to be more expensive, but you should still be able to complete the replacement for less than £60 in most cases.
The laptop spares shop can supply or source acer keyboard or any laptop keyboard really.
Not to worry, dont be scared of a high repair bill, you can swap the board out yourself !
The following notes are for guidance only, and if you are in any doubt at any stage you should take the machine to a reputable repair shop.
We stock keyboards for acer, toshiba, HP, fujitsu, IBM, sony and samsung. The Laptop Spares Shop also sources parts for many other clients, and we can usually source most keyboards for lesser known brands within 4-5 days maximum.
Please email sales@laptopsparesshop.co.uk if you need any help or advise prior to purchase, or contact 01282 864415.
FIRST - make sure the machine is powered off and dis-connected from the mains. Now remove the battery by clicking any locks switches to allow battery removal.Then flip the machine over and check for any screws with a keyboard label next to them. These need to come out (well obviously!)
Most ibm and other keyboards are removed in the same way
Once the mentioned screws are removed check in the empty battery console.
If there are any screws around the battery tray area these may be anchoring the platic trim along the top of the keyboard. Also remove the screws in each back corner of the casing. Now check the back of the machine to see if the hinge covers have any screws holding them in place - remove them if so.
If you are happy that all screws have been removed, gently prise up the platic trim at the top of the keyboard. BE CAREFUL this may be very stiff and held on by several plastic clips. Once lifted check to see if the power button is connected to the motherboard or power pcb, and dis-connect to allow removal.
Unscrew any screws at the top of the keyboard to allow it to be lifted off the machine. Again be careful, some models have a small amount of glue holding the keyboard in place.
Now lift the keyboard gently off the machine and reveal the the connection ribbon. Gently push up the lugs on the clip where the keyboard connects to the laptop (very gentle here!)
Now gently slide the keyboard ribbon out of its connector and lift the board off the machine.
The laptop spares shop accepts no responsibility for any damage you may do to your machine in removing the keyboard. The notes above are for guidance only, and you should consult the support manual for your machine by contacting manufacturer support first.
Place an order and reverse the above process when your new keyboard arrives.
I hope the above has prooved useful, and gives you the confidence to tackle this fairly simple repair yourself.The trickiest part is removing the trim above the keyboard, which can be very stiff and feel to be anchored by screws. In fact, if you have removed the screws from under the keyboard, this is held in place only by plastic clips to the side of the machine. The use of a good flat scrw driver will remove this - but be careful.
Also exercise caution and extreme care when unclipping the ribbon from the motherboard once the keyboard is lifted. The anchor bracket where the ribbon connects is very thin & delicate, and is very easy to break - so be careful !!
Thanks for reading this, and if you do decide that the above is not for you, you can always ship the machine to us for replacement. We usually charge an extra £10 for the above.
We also stock laptop as well as quality and accessories.
Please contact The Laptop Spares Shop Ltd, 259 North Valley Road,Colne,Lancashire,UK. BB8 9DR if you need any more help. You can also email us at sales@laptopsparesshop.co.uk or telephone us on 01282 864415. Please also check laptopsparesshop.co.uk for more information about dell D600
Gain handy facts about Compare Top Mortgage Rates - read this page.
Filed under Computers Tips by computergeek
